How to make a toothbrush

Date: 16.10.2018, 16:47 / View: 81181

Gradually, instead of laptops, netbooks come, as you know, for the sake of reducing their size, they do not equip DVD drives. In this connection, sometimes, there may be difficulties, for example, in reinstalling the operating system on a netbook, a reasonable question is created- How can I install / reinstall the system on a netbook? You can of course buy an external DVD drive, but spending money on a device that will be needed once a year, or even less often, is meaningless. The exit is to make a bootable USB flash drive and install the operating system from it.

In this article I will describe several ways to make a bootable USB flash drive for free and with little effort:

1 Creating a bootable USB flash drive using the program UltraISO.

2 Creating a bootable USB flash drive using a utility from Microsoft - USB / DVD Download Tool.

3 Creating a bootable USB flash drive using Windows 7 command line.

Let me explain why I chose these three options, so:

The advantages in creating a bootable USB flash drive using the UltraISO program are that even in trial (free) mode this program will help you to create a bootable USB flash drive without any problems and it also has many different functions. The disadvantages (if they can be considered as such) are that it needs to be downloaded and installed, the installation process itself consists in pressing 4 times the Next key. In my opinion, the ideal third-party solution for creating a bootable flash drive Windows XP, 7, 8.

Creating a bootable USB flash drive using a utility from Microsoft - USB / DVD Download Tool, plus this method is that without special skills and abilities, thanks to a few mouse clicks you get a bootable USB flash drive. Minus - an official ISO image of the operating system (downloaded from the Microsoft website) is required, otherwise the utility may not perceive your ISO image and refuse to write it to a USB flash drive or will give an error when creating an image (I encountered such problems personally, which is why I consider it necessary to specify them ).

And finally, creating a bootable USB flash drive using the Windows 7 command line. A big plus of this method is that you do not need to install anything, but simply by typing a few commands, you can get a bootable USB flash drive with Windows XP, 7, 8. ... probably only in its not visibility, since all commands are executed on the command line.

So, to create a bootable USB flash drive you need:

1 USB flash drive with a capacity of at least 4 Gb (everything must be removed from the USB flash drive, since it will be formatted)

2 ISO system image

3 BIOS, which allows you to start the installation from a flash drive

4 Image creation utility (UltraISO, USB / DVD Download Tool)

If you have all this, then proceed: Creating a bootable USB flash drive using the UltraISO program.

First of all, download the latest version of UltraISO.

After that, run the installation program, click "Next"

We agree with the license agreement

Choose or leave the default installation location

After that, a couple more times, click "Next" and "Install". At the end of the installation, click "Finish", the program will start automatically. The first welcome window appears, click "Trial Period"

After this, the UltraISO program will open, click "File-Open"

Choose an ISO image of the system, in this example, Windows 8 will be used

After that click "Self-load- Burn hard disk image ..."

In the next window, select the device on which the image will be recorded and click "Record".

After that, a window will appear warning that the flash drive will be all remotely, click "Yes."

Then the recording process will start, which will last a few minutes.

After the end of the process of writing to a USB flash drive, it becomes bootable. Creating a bootable USB flash drive using a utility from Microsoft - USB / DVD Download Tool.


First of all we download USB / DVD Download Tool. Installing this utility is extremely simple, we start the installation, click "Next- Install- Finish" - everything !!! Launch the shortcut on the desktop USB / DVD Download Tool.

In the opened window, click “Browse” and select the ISO image of the system.

Next, select the type of media on which the image of the system will be recorded, in our case “USB device”.

After that, we indicate which USB flash drive to burn the ISO image of the system.

A window will appear that all data from the flash drive will be deleted, if you do not have important information on the USB, click "Erase USB Device", otherwise copy all the data to another media.

The next window is the same content and warns that all information from the selected USB device will be deleted.

After that, start the process of formatting and copying all the files ... Sit and watch ...

If the process is successful, I congratulate you, if not, repeat again. With this utility, you can create a Windows7, Windows8, Windows2008 (R2) image. Create a bootable USB flash drive using the Windows 7 command line.

Insert the USB flash drive into the computer / laptop, after removing all the information from it.

We start the command line, click "Start", in the search line enter "CMD" and press "Enter".

Enter the "diskpart" command (without quotes) (an interpreter that allows you to manage objects (disks, partitions or volumes) using scripts or commands). press "Enter" (after each command you must press "Enter").

The "list disk" command (without quotes) displays a list of all devices.

In this case, 2 drives 0 - hard drive, 1 - USB flash drive. In this example, I will select 1 device (flash drive), to select, you must enter the command "select disk X", X is the device number which will be bootable in this example, select disk 1 (without quotes).

The following command enter "clean" (without quotes) to clean the disk (USB).

Then we create the partition with the "create partition primary" command (without quotes).

Next, enter the command "select partition 1" (without quotes).

Next "active" command (without quotes)

After that, format the disk with the command "format fs = NTFS" (without quotes)

We are waiting for the formatting to finish, the line "Diskpart successfully formatted the volume" will appear. After that, enter the command "assign" (without quotes) to automatically assign a letter.

On this, you can finish the command line, to do this, click "Exit" (without quotes) and close the command line.

Now you need to unzip the ISO image with the operating system, to do this, click on the file with the right mouse button and select unzip (picture fits if you have WinRAR installed).

After that, copy the files from the unzipped folder to the USB flash drive.

Bootable USB flash drive ready !!!

I hope this article has helped you install an operating system from a USB flash drive.

Now you need to boot from a USB flash drive and install Windows, how to do this is described in the article How to boot from a CD / DWD disk or USB flash drive. I really hope my article has helped you! Please share the link with friends:


Related news:


How to do heated seats with their hands
Suspended ceiling with his hands video
The design of the bathroom with their hands
Master class crochet patterns


ReCache | DelPage
Memory used: 51.37KB of 768KB
Render time: 0.015 sec