Step-by-step installation of doors with their hands

Date: 15.10.2018, 16:53 / View: 64462
Image titled Install an Interior Door Step 1

one

Buy your door. Opening the door to the wall. The door frame is generally 2 "wide wider than the size of the door opened. This is a plumb "level". Image titled Install an Interior Door Step 2

2

Start getting things straightened out. Start by drawing a plumb line on the wall. If you’re not sure, you’ll also be able to get in the middle of the door. there are many models that can attach to a wall). Image titled Install an Interior Door Step 3

3

Attach the door installation brackets. Attach door pre-attached. Place a bracket behind each of the three hinges. The other side of the jamb. "The first bracket should be 8" and the final bracket should be " Image titled Install an Interior Door Step 4

four

Place the door into the opening on top of the blocks or shims. Place 1/2 "block if installed or 1/4" block if installing. Never place the door directly on the unfinished floor. Image titled Install an Interior Door Step 5

five

Attach the brackets. Using the plumbing line on the wall Then the screw is not used as the first bracket. The door is now level. Junction of the 3 brackets. Screwing in the top bracket. Screwing in the final 2 brackets. Can be removed. Image titled Install an Interior Door Step 6

6

Install the casing around the installed door. It is also a stripe of wood hiding. Done correctly, the trim will perfectly fit the installation brackets. It depends on your preference.


Related news:


How to make a fence for the stairs
How to make the speedometer showed more
How to make gear
How to make maracas


ReCache | DelPage
Memory used: 39.26KB of 768KB
Render time: 0.069 sec